老外为他8岁的孙子打造的作品
时间:2007-10-13 出处：网络 作者：Zak 标签:
内容摘要:
老外为他8岁的孙子打造的作品,图片以及制作过程
老外为他8岁的孙子打造的作品
下面是图片以及制作过程
Zak's my 8yr old son and best freind! in amongst all the modding i endulge my self i promised to take some time out last school hols and share some Dad and Zak time modding him his own PC.
Zak had an ageing antec superlanboy, altho it wasnt a bad looking pc!had all the bling a 8yr old needs! Zak had asked if we could make hime somthing new
So! heres what we made together! it was a great way to spend a week and together we came up with some pretty cool ideas.
Zak's Hevy Plex super Lan boy.
I decided a new case was needed for what we had planned and a good supply of 6mm thick cut to size plex panels and tubes!
Next was to make the custom res's for this mod.
cut and prep the side plex panel, heax head bolts are use for an industrial look.
A top window is added using the same method
and the window side is done the same way to match
It was decided that would ditch the door in favour of somthing that would fit in with the rest of the mod.
Some Extra lighting was added to help light up the side tanks
Next was to bolt up the rad/fans and add the powerbus.
Using RCA type multiport to supply power to the fan, this powerbus will also supply power to what will be this mods main feature.
The main feature of the case will be custom made light leads that will supply light to the plex panels.
Custom leads have to be made for this.i call these,
Defyant Style Flex leads
the leads will plug into the rear power bus and can be used in a "hot swappable" way.
Double adaptors can be added to supply power to more leads.
Zak now has a feature of lighting effects he can change as he desires.
Next was to move onto an idea i used in HPR2 but this time i let Zak choose the choice of material to use.
Zak chose Mirror flex panel!
First thing was to cut a new facia panel
As can be seen also testing the "full blue Look" with his matrix orbital.
Mother Board Madness!
I'd used this mod on HPR2 effectively.
Using a template made from more "seethru" plex material i made a template for what will be Zak's mirror plate mother board stealth cover!
simple scoring method was used to bend the mirrow plex and hot glue was used to reinforce the inner scorings.
Also a matching "dummy back panel" was made.
Fitting up the cover and back panel
文章地址：http://www.case-mod.net/mod/20071013/7.html
转载请保留原作者及出处
版权归原作者所有,文章若有侵犯作者版权,请与我们联系,我们将立即删除修改.
相关文章
评论(2条)]
