在家改造模块化电源电源改造教程

时间:2007-11-28 出处：bit-tech.net 作者：Darth Invader 标签:

内容摘要:
在家改造模块化电源电源改造教程, 首先打开电源,去掉上面的螺丝为电源去掉原来顶部盖子来得到一个新版面 I holed and I riveted the new front, keeping the old Using a micro-rectifies, I did a cut to case the connector db25, and with the drill and a thick

在家改造模块化电源电源改造教程, 字串1

首先打开电源,去掉上面的螺丝字串1

为电源去掉原来顶部盖子来得到一个新版面

字串5

I holed and I riveted the new front, keeping the old

Using a micro-rectifies, I did a cut to case the connector db25, and with the drill and a thick drill, I did 4 holes for the connectors Mic

字串1

I stretched the connector atx cables until the connector db25 and cut them letting a free time to weld them. (Hint: Use cables term-retractile or hot glue to isolate the cables after weld them)

I passed the cable atx inside cuting, I arrested with retractile term, (watch out to do not invert the cables order), weld them in the other connector db25

I repeated the operation, now with the cables molex
字串6

To improve the visual and the refrigeration, I changed for fan of psupor a colored, put a cover of acrylic and a second fan in the cover top, and I used lasergrill for the finishing.

Then it was alone to close the source, and it is ready! Modular PSU made at home!

字串8

字串4